ScanPix

For makers and laser cutters

QR code for laser engraving.

Download a vector SVG with solid square modules and a transparent background, ready for your laser software.

Make your engraving file

Free. No sign-up. Nothing to renew.

Example QR code engraved in dark brown on a round maple coaster, with solid square modules
An example made in ScanPix, shown on wood. Scan it and it opens this page.

Why many QR files engrave badly

Most QR generators are made for screens. Their PNG files have soft edges, tiny gaps between round dots, gradients or photo backgrounds, and all of that blurs at the size of a laser's spot. Tracing a raster image into vectors adds wobble to every edge.

The other problem is permanence. A code that points through a redirect service can stop working when a trial ends, and you can't reprint a cutting board. ScanPix codes hold your link directly, so they never expire.

How to make it

  1. Open the editor with the engraving settings below.
  2. Paste your link, or choose another type such as contact card or Wi-Fi. Shorter content gives fewer, larger squares.
  3. Check that the scan badge says Strong, then download SVG. The background is transparent, so only the dark squares come through.
  4. Import the SVG into LightBurn or your laser software, set the size, and engrave a test on scrap material before the real piece.

Recommended settings

LayoutNo photo
Dots and cornersSquare dots at full size, so neighboring squares join up, and square corners
BackgroundTransparent
ContentKeep it short, such as your home page rather than a long product link, so each square stays large
DownloadSVG

Engraving and size tips

  • Size. As a rule of thumb, at least 20 mm (about 0.8 in) square for a short link. Go larger on grainy wood or for longer content.
  • Contrast. It does most of the work. A dark burn on light maple or birch, or engraved anodized aluminum, scans best.
  • Engrave the dark squares. Not the light ones. Light-on-dark codes are read by many phone cameras but not all scanner apps, so test them before you rely on one.
  • Keep the margin clear. Leave the blank border around the code free of cuts, text and edges. Scanners need it to find the code.

Selling engraved pieces

A code on a coaster, a sign or a keepsake box should keep working for as long as the object lasts. Point it at a page you control, such as your shop or your own website, so you can change what it shows without re-engraving.

FAQ

Can you laser engrave a QR code?

Yes. Engrave the dark modules into a light material such as maple, birch or anodized aluminum, keep the blank margin around the code clear, and test-scan the finished piece. A clean vector file with solid squares gives the sharpest result.

What is the best file format for laser engraving a QR code?

SVG. It is a vector file, so the squares stay sharp at any size and laser software such as LightBurn can fill them directly. ScanPix exports SVG with a transparent background, so only the dark modules come through.

How small can a laser engraved QR code be?

As a rule of thumb, about 20 mm (0.8 in) square for a short link on a smooth, light material. Go larger on grainy wood, on dark materials, or when the code holds more text. Engrave a test on scrap and scan it before the final piece.

Will an engraved QR code still scan on wood?

Usually, if the burn is dark and the wood is light and fine-grained. Strong grain and dark woods lower the contrast, so make the code larger, burn deeper or darker, and test with a couple of phones.

Do I need to engrave or leave the black part?

Engrave the dark modules and leave the light parts as bare material. The file from ScanPix already works this way: the dark squares are filled shapes and everything else is transparent.